What people use our prints for

We do exactly one thing — 3D printing — but it solves very different problems. These are the applications we are asked for most, with what works and what does not.

We only offer 3D printing. No injection moulding, no machining, no electronics assembly — if your part needs any of those, we say so before charging you.

Figurines and characters

Collectible figures, busts, tabletop miniatures and your own characters, in extreme-detail resin or in filament for large sizes.

Where it works well

28 to 54 mm miniatures for role-playing, wargames and dioramas
Collectible figures and busts from a model you bought or sculpted yourself
Original characters: brand mascots, avatars, personalised gifts

Where it stops

Multi-colour artistic painting. We deliver the figure primed or in one colour; the brushwork is yours.
Creating the character from a photo or a drawing with no 3D model. That is a modelling job, quoted separately.
Producing licensed characters from films, series or games for resale.

See how we do it

Cosplay and props

Helmets, masks, armour, gauntlets and prop weapons, printed in sections and ready to sand and paint.

Where it works well

Full helmets and masks, in one piece or split into sections
Armour plates, pauldrons, gauntlets and belts
Prop weapons and light accessories built round a rod core

Where it stops

Real protection. Printed armour is costume: it does not stop blows or falls.
Leaving a PLA piece in a car in summer. It softens at 55 °C and warps.
Assembly, filler and multi-colour final paint. We print, sand and prime; the character finish is yours.

See how we do it

Electronics enclosures

Boxes, lids, front panels and mounts for your board or instrument, as one-offs or short runs.

Where it works well

Enclosure prototypes before committing to a mould
Runs of 1 to 500 units, where tooling never pays for itself
Front panels with custom cut-outs for connectors and displays

Where it stops

Certified sealing. We can design a gasket channel, but we certify no IP rating.
EMI shielding. Plastic does not shield; you will need conductive paint or a metal box.
Equipment running above 95 °C inside. Not even ABS holds up there.

See how we do it

Robotics and drones

Sensor mounts, chassis, grippers and gearbox housings in light technical plastics.

Where it works well

Sensor, camera and LIDAR mounts with exactly the geometry you need
Drone frames and arms, where every gram counts
Custom grippers and end effectors for one specific object

Where it stops

Gears transmitting real torque. A printed gear works in a mock-up; under load in a reducer it eats its own teeth.
Structural parts under constant load. Plastic creeps, and months later the part has sagged.
Anything sitting against a hot motor, if it is PLA. Use PETG or ABS there.

See how we do it

Letters and signage

Dimensional letters, logos and signage for shops, offices, events and weddings, at the exact size and colour.

Where it works well

Dimensional letters for indoors: shops, offices, trade stands, weddings
Raised logos, in the exact brand colour
Door and office signage, with numbers and pictograms

Where it stops

Assembled illuminated signs. We can print the housing and the diffuser; the electrical work is not ours.
Letters over 250 mm in one piece. They get split and bonded, with the joint hidden on an edge.
Outdoors in PLA. A PLA letter on a south-facing façade will sag through a Barcelona summer.

See how we do it

Models and architecture

Massing studies, competition models and product prototypes made to be shown to a client, not binned.

Where it works well

Massing studies: the building in your hand, fast and cheap
Competition models with façades, openings and floor-by-floor breakdown
Product prototypes to validate form, feel and proportion before tooling

Where it stops

Large single-piece models. Anything over 250 mm gets split, and a big model means many pieces and a lot of assembly.
Detail below 0.4 mm in FDM. A 1:200 handrail will not print: that is what resin is for.
True transparency. We do not print glazing; it is solved with an opening and cut acrylic.

See how we do it

Spares and broken parts

The part that broke and the maker no longer sells: knobs, clips, covers, gears, appliance brackets.

Where it works well

Knobs, dials and handles for discontinued appliances
Plastic clips, tabs and anchors that have snapped
Covers, grilles and trim nobody makes any more

Where it stops

Safety parts. No brakes, seat belts, child-seat anchors, helmets or ladders. No exceptions.
Trademarked parts for resale. We reproduce a spare for your own appliance, not runs of another brand’s parts.
Parts under pressure, gas, or hot pressurised water. Printed plastic has layers, and layers are where it splits.

See how we do it

RC, modelling and toys

Spares and upgrades for RC cars, boats and drones, scale model parts, and toys that survive a child.

Where it works well

RC spares that break often: bumpers, towers, servo mounts
Drone parts: camera mounts, prop guards, landing legs
Bodies and model details that no kit contains

Where it stops

Toys for under-3s. We do not certify EN 71, and a small printed part can break into swallowable pieces.
High-torque drivetrain gears. A printed pinion in a 1:8 brushless lasts one afternoon.
Parts living in a car parked in the sun. PLA sags; PETG or better is required.

See how we do it

Jigs and displays

The parts nobody sells because they only suit your workshop: templates, stops, soft jaws and shop displays.

Where it works well

Drill templates that put holes in the right place, a thousand times over
Assembly fixtures: cradles, stops and locators for a line
Soft jaws shaped to your part, so it does not get marked

Where it stops

Fixtures taking machine loads. A milling vice jaw in plastic, no; a soft jaw to hold without marking, yes.
Drill guides without a metal bush. The bit eats the plastic within a dozen holes: a bush has to go in.
Uncoated food contact. Layer lines trap residue and none of our filament is food certified.

See how we do it

Merch and corporate gifts

Keyrings, awards, phone stands and giveaways with your logo for trade fairs, events and team welcome packs — from one unit.

Where it works well

Keyrings, pins and tags with your logo, in your brand colour
Awards and internal trophies, each with the winner’s name on it
Phone stands, coasters and desk pieces for trade fairs

Where it stops

Large runs. Above roughly 500 identical units, injection moulding or laser engraving costs less, and we will say so.
Anything touching food or drink: mugs, cups, coasters that get wet. Layer lines trap residue and none of our filament is food certified.
Merch that is not plastic. No shirts, pens, notebooks or USB sticks: only the printed piece.

See how we do it

Got the file for your part?

Upload it to the configurator for an exact price in seconds. If you do not have one yet, we can design it.

Calculate price Tell us about your project